Technical Specifications
| Processor |
MPC8240 with PowerPC 603 Core |
|
64-bit peripheral bus |
|
32-bit PCI 2.1 bus interface |
|
16 Kbyte instruction cache |
|
16 Kbyte data cache |
|
On-chip floating point unit |
| Dynamic RAM |
Four (4 x 1Mbit x 16) SDRAM devices |
|
64 Mbyte capacity |
|
64-bit data bus width |
|
Accessible by other VMEbus masters |
| Flash Memory |
Two independent banks |
|
2 x 8 Mbyte capacity |
|
64-bit data bus width |
|
Accessible by other VMEbus masters |
|
Single 5 Volt programmable devices |
| Static RAM |
512 Kbyte or 2 Mbyte capacity |
|
32-bit data bus width |
|
Accessible by other VMEbus masters |
|
Optional data backup with with on-board battery and gold cap |
| EEPROM |
2 Kbyte serial access device |
| Serial I/O |
Two Rs232/422/485 serial ports |
| LAN |
Ethernet 10/100BaseT option |
| Hardware Monitor |
Measures temperature and supply voltages |
| Real Time Clock |
PCF8563 with time and date function |
| |
Backup function with on-board supply |
| Data Backup |
Short term backup via service freegold cap |
| |
Extended backup via 500 mAh lithium cell |
| |
Extended backup via VMEbus standby line |
| Boot Modes |
Jumper selectable bootup from local FLASH or via VMEbus |
| Front Panel LEDs |
One RUN LED |
| |
One user programmable LED |
| Front Panel Controls |
RESET button for complete hardware reset |
| Interrupt Handler |
7 level on-board interrupt handler |
| |
7 level VMEbus interrupt handler |
| |
Software programmable VMEbus interrupt mask |
| System Controller |
Full VMEbus slot 1 functions, single level arbiter |
| |
Single jumper function enable |
| VMEbus Interface |
According to ANSI/IEEE STD1014-1987 |
| VMEbus Master |
DTB A16/A24 - D08 (EO)/D16 |
| |
VMEbus address modifier support |
| |
Standard and short I/O addressing |
| |
Dynamic bus sizing feature |
| VMEbus Slave |
DTB A16 - D08 (EO)/D16/ADO |
| |
Programmable VMEbus shared access base address |
| |
Programmable VMEbus shared access offset register |
| VMEbus Mailbox |
Programmable short I/O decoded 1 Kbyte range |
| |
Autovector controlled local interrupt mode |
| VMEbus Arbiter |
Single level arbiter on level 3 |
| VMEbus Requester |
Single level 2:1 pass requester |
| |
Release when done or 4 level release on request modes |
| Software Support |
Full support for pSOS+, VxWorks and OS-9 |
| Options |
-40°/+85° C operational temperature range |
| |
Conformal coating |
| |
One PMC expansion port |
| |
Two PC-MIP expansion ports |
| |
PCI extension port |
Ordering Information
| Part# |
Description |
| S27301 |
MPC8240, 250 MHz, 32 MB SDRAM, 8 MB FLASH, PCI-Extension |
| S27352 |
MPC8240, 250 MHz, 64 MB SDRAM, 16 MB FLASH, 10/100BaseT |
| S27353 |
MPC8240, 250 MHz, 64 MB SDRAM, 16 MB FLASH, 10/100BaseT, one PMC slot, 8 HP (two slots wide) |
| S27354 |
MPC8240, 250 MHz, 64 MB SDRAM, 16 MB FLASH, 10/100BaseT, 2x PC-MIP slot, 8 HP (two slots wide) |
| S27305 |
MPC8240, 250 MHz, 32 MB SDRAM, 16 MB FLASH, 512 KB SRAM, -40°/+85°C |
| S27380 |
OS-9 BSP for CU824 |
| S27381 |
pSOS+ BSP for CU824 |
| S27383 |
VxWorks BSP for CU824 |