MPX8349FA

Features

• MPC8349E with e300 Power PC Core
• Integrated DDR Memory Controller
• 1260 MIPS@667MHz
• up to 256MB DDR SDRAM (with ECC)·
• up to 32MB Flash
• DiscOnChip NAND-Flash (option)
• 1MB SRAM (option)
• RTC, Watchdog, Reset Generator
• Single 3,3V Supply
• two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to Carrier Board
• 2x 32bit/ 66Mhz PCI Ports
• 2x 10/100/1000 Ethernet
• High Speed Serial Ports
• 2x high speed USB Ports
• 2x I²C (Master or Slave)·
• Serial Peripheral Interface (SPI)
• General Purpose Parallel I/O (GPIO)
• ALTERA Cyclone II (EP2C) FPGA
• 32MB DDR-SDRAM at FPGA
• 104 Pin Zero Force Connector, that makes FPGA I/O available to Carrier Board
• optional -40° to +85°C

MPX8349FA

The MPX8349FA is based on the MPX8349 and is fully compatible to the module. It offers a FPGA extension with its own DDR-SDRAM and DC/DC converter. The FPGA is linked to the MPC8349 via local bus and PCI. The CPU loads the FPGA after power-up. A 104-pin MPX connector makes FPGA I/Os accessible on a carrier board. The MPX8349FA forms part of the new MPX standard. The new connector technology allows mounting in both directions and stacking of modules with various interface boards. Versions for extended temperature (-40°..+85°C) are available.

CRX01 Carrier
The CRX01 Carrier Board covers physical layer for the most important MPX ports. It is designed not only for evaluating MPX modules during the design phase. Due to ist compact design it will fit into many applications directly. As the MPX technology allows stacking of boards application-specific functionality can be realised on dedicated PCBs that may be mounted on top of a combination CRX01-MPX-Module.

CRX01 Features

• 2x 1000/100/10 MBit Ethernet on RJ45 connectors
• USB 2.0 Host
• 2x RS232 on RJ11 connectors, 1x 32-Bit PCI on edge connector
• JTAG connector
• Reset-Key
• User-LED
• 24V DC supply, Single Euro Format 100x160mm²