PM520

MPC5200 in Credit Card Size

Features

  • MPC5200 @ 400 MHz with enhanced 603e kernel (G2 PowerPC) with power management
  • 32 bit wide data bus for the 64 MByte SDR- or DDR-SDRAM area and the 4 MByte Flash memory bank
  • Up to 128MB SDRAM (DDR optional)
  • Two 140-pin connectors make I/O and bus available to carrier board
  • Single 3.3V Power Supply Input

The PM854 and PM826 miriac™-Modules are based on the Freescale PowerQUICC-III MPC8540 and MPC8560 processor respectively. DDR-SDRAM technology increases the performance additionally. All Processor and I/O Signals such as Gigabit Ethernet, RapidIO and PCI-X are routed to High Density connectors. The size of the PM854 module is 80x95mm². Extended Temperature Versions (–40°C to + 85°C) are available

Additional Photos

CR825 Evaluation Carrier

CE520 Extension Kit for PM520/CR825


  1. Combines a powerful 603e PowerPC core with many integrated I/O functions including PCI, Ethernet, CAN, USB, Infrared, ATA
  2. Simple carrier board can be quickly designed to your I/O specification
  3. Compact size, only 65mm x 87mm (2.56 x 3.55 inches)
  4. Offers all features of the MPC5200 via external connections, including I 2 C-port, two MSCAN-controllers, a PCI and a ATA bus interface, six serial I/O controllers, a 10/100MB
  5. Ethernet MAC, a USB 1.1 host port, a SPI-interface and an IR data port.
  6. The complete PCI / ATA / SRAM bus as well as all 64 I/O lines of the MPC5200 are accessible by the carrier board through two 140 pin connectors.
  7. Versions available with -40°/+85°C operating temperature range

Technical Specifications
Processor MPC5200 @ 400 MHz with enhanced 603e kernel (G2 PowerPC) with power management
Memory 32 bit wide data bus for the 64 MByte SDR- or DDR-SDRAM area and the 4
MByte Flash memory bank..
Up to 128MB SDRAM (DDR optional)
Up to 32 MB Flash
I/O Two 140-pin connectors make I/O and bus available to carrier board
One PCI port
One 100BaseT Fast Ethernet
Three high-speed serial ports
Two CAN 2.0B Master ports
Two USB Master ports
One version 4 ATA compatible interface
One I/R
One IrDA port
Power Single 3.3V Power Supply Input
CMOS technology, which allows for a power consumption as low
as: 3.3V / 2,1W @ 400 MHz CPU speed.
Software Support for VxWorks, pSOS+, OS-9 and (RT) Linux

PM520 Carrier
Design of carrier board is simple. It requires only:

  • 3.3 V supplied to module
  • Line drivers depending upon your individual I/O requirements

Three options for carrier boards:

  1. Design your own
  2. Let us design a carrier based upon your I/O requirements, physical dimensions with the required backplane or mezzanine bus interface
  3. The CR825 Evaluation Carrier can be used as a design reference or as a target board

CR825 Carrier Features

  • 10/100Mbit Ethernet
  • 4 Serial Ports RS232, optionally RS422, RS485 or TTL
  • SPI and I²C
  • All MPC8260 I/O lines available on ribbon cable connectors
  • MPC8260 local bus or MPC8265 PCI bus available on PCI slot connector
  • Reset and Abort Keys
  • Various Control LEDs
  • 8x DIP Switches
  • 8x User LEDs
  • COP / JTAG Interface available
  • ATX-Power Supply Connector

CE520 Carrier Extension

  • Carrier Extension for CR825 / PM520 adds physical layer for:
    1. Two CAN ports
    2. USB
    3. ATA (44 pin Header)
  • CompactFlash Interface
  • BootProm for the PM520 module allows restoring the boot section of the local Flash area.

Ordering Information
Part# Description
828904 PM520 Miriac Power Module MPC5200/400 64MB SDRAM, 16MB FLASH
828905 PM520 Miriac Power Module MPC5200/400 64MB SDRAM, 16MB FLASH ext.temp.
829501 CR825 Evaluation Carrier for PM520
829701 CE520 Extension Kit for PM520/CR825

back to top