| |
|
|
|
|
 |
V3PS
3U Open VPX 10 Gb Ethernet Switch
   
V3PS
Click
to Enlarge
|
Features
- Fulcrum 'ALTA' fully integrated 24-Port single-chip10
Gigabit Ethernet Switch
- Includes L2/L3/L4 packet classification, routing,
tunneling, class of service provisioning and congestion
management
- Intel© Core™ I7 Arrandale Processor
- QM57 Platform Controller Hub (PCH)
- One PMC/XMC site (may require depopulating QFSP capability)
- Supports the Dynatem Expansion Module (DXM) which
provides debug and programming headers as well as front
panel I/O expansion
- OpenVPX™ standard for a 3U Switch Module Profile
designated as MOD3-SWH-6F6U-16.4.1-5
- Available in conduction cooled versions for rugged
application
|
|
Introduction:
The V3PS is a high performance 10 Gigabit
Ethernet Switch based on the 3U OpenVPX™ (VITA 65)
form factor. Offered in both convection cooled and ruggedized
conduction cooled variants, the V3PS will meet the needs
of numerous commercial and military applications requiring
maximum switch flexibility with minimum latency, maximum
processing power, and low power consumption, all in a
small physical footprint.
At the heart of the V3PS is a Fulcrum 'ALTA' series device,
a fully integrated 24-Port single-chip wire-speed 10 Gigabit
Ethernet Switch. It includes enhanced features such as
L2/L3/L4 packet classification, routing, tunneling, class
of service provisioning and congestion management. The
ALTA provides the switch fabric for backplane data and
control planes. The V3PS also has a front panel QSFP port
for high-bandwidth uplink support.
An Intel© Core™ I7 Arrandale Processor and
Ibex Peak QM57 Platform Controller Hub (PCH) form the
data processing backbone of the V3PS. With a memory controller
integrated in the processor, the V3PS supports up to 2
GBytes of DDR3 SDRAM running at up to 1066 MHz. The processor
utilizes its PCI Express (PCIe) port to connect to the
ALTA 10GE switch management port.
The QM57 PCH utilizes the following interfaces in the
V3PS: PCI Express; PCI; Serial ATA (SATA); Universal Serial
Bus; VGA;, SMBus, and LPC Bus. One x4 PCIe port is routed
to the XMC J15 connector per VITA 42.3. One x4 PCIe port
is routed to an Intel© 82580 Quad Gigabit Ethernet
Controller providing a CPU path into both the payload
switch fabric as well as local DXM I/O via the XMC J16
connector. A 32-bit 33MHz PCI bus provides support for
a PMC module. One SATA port is routed to the backplane
and one to the XMC J16 connector. One USB port is routed
to the front panel, one to the backplane, and one to the
XMC J16 connector. One additional SATA port is connected
to an SM2242 Flash Controller to support 16GBytes of solid
state storage. Two 32Mbit SPI PROMs provide 8MBytes of
in-circuit programmable boot code. A VGA interfaces provide
graphics output capability via backplane RTM connections.
Finally, the PCH LPC bus is connected to a Super I/O chip,
a Trusted Platform Module, and the XMC J16 connector.
The V3PD supports the Dynatem Expansion Module (DXM) which
provides debug and programming headers as well as front
panel I/O expansion. Please refer the DXM Data Sheet for
additional information.
The V3PS adheres to the OpenVPX™ standard for a
3U Switch Module Profile designated as MOD3-SWH-6F6U-16.4.1-5.
|
|
| Switch |
One FocalPoint© FMx324 Series 24-Port 10 Gigabit
Ethernet Switch
Performance
- KR4, KR, XFI, XAUI or RXAUI interfaces
- 40G across 4-lanes using MLD/KR4 (802.3ba)
- Cut-through and store-and-forward modes
Layer 2 (FM5000)
- 64K-entry MAC table
- Efficient MAC table utilization with 16-way hash
- 64-port LAG filtering
- Up to 36K multicast groups with wire-speed replication
- Multiple Spanning Tree support
- Independent and shared VLAN learning
- Extensive VLAN support
- Enhanced Q-in-Q learning and filtering (802.1ad)
Layer 3 (FM6000, FM7000)
- IPv4, IPv6 lookups
- Up to 64K IPv4 entries or up to 16K IPv6 entries
- Fully-provisioned IP multicast routing
- MAC-in-MAC support (802.1ah)
- MPLS support
- IPv6 tunneling
High performance policy engine
- Deep packet inspection at 960 Mpps
- 64K binary search tree for host address matching
- 28K x 36-bit TCAM
- Multi-stage TCAM architecture
- Ingress and egress L2/L3/L4 ACL rules
- < 200ns latency with ACLs and routing enabled
QoS and congestion management
- 8K flow-based policers and counters
- Large frame memory with 8 traffic class partitions
- 12 class of service queues at each egress
- Strict or DRR egress scheduling with traffic shaping
- IEEE QCN support for adaptive routing
Security
- Port-based security (802.1X)
- MAC address security
- DOS prevention
Switch management
- x4 PCIe from PCH
- In-band management frames
Intel ® Turbo Boost Technology
|
Technical Specifications
| CPU |
One Intel© dual-core Arrandale Processor running
at 1.04 GHz
Direct Media Interface Bus supporting 2.5GByte/Sec transfer
rates
Single Memory Controller supporting up to 2GBytes DDR3
SDRAM at 533/667 MHz (1066 MHz DDR)
x4 PCIe Interface connected to the Fulcrum FMx324 Switch
mgt port
32-KB instruction and 32-KB data L1 cache for each core
256-KB shared instruction/data L2 cache for each core
4-MB shared instruction/data L3 cache, shared among all
cores
Intel©® Virtualization Technology (Intel©®
VT-x)
Intel©® Virtualization Technology for Directed
I/O (Intel©® VT-d)
Intel©® Trusted Execution Technology (Intel©®
TXT)
Intel©® Hyper-Threading Technology (Intel©®
HT Technology)
|
|
Platform Controller Hub (PCH)
|
Intel© Ibex Peak QM57 Platform Controller Hub
Configured for two x4 PCI Express ports (PCI Express Base
Specification, Revision 2.0), both root complex
Enhanced DMA controller, interrupt controller, and timer
functions
Integrated Serial ATA host controllers with independent
DMA operation
USB host interface supporting one EHCI high-speed USB
2.0 Host controller
SMBus for connection to on-board devices
Analog Display port (VGA)
Low Pin Count (LPC) interface to Super I/O and DSM Interface
Serial Peripheral Interface (SPI) for boot code
|
|
Intel© 82580 Quad Gigabit Ethernet Controller
|
Provides x2 1000BASE-KX connectivity to switch fabric
Provides x2 1000BASE-KX connectivity to XMC J16
IEEE1588 Precision Time Protocol (PTP) support
|
| Netlogic NLP1342 Quad 10 Gigabit PHY |
Optimized for QSFP applications
Complies with QSFP Transceiver Specification Rev. 1.0
Pre-emphasis and equalization allow support for -SR and
-LR optical modules as well as -CX1 direct attached copper
|
|
SMSC SCH3112 Super I/O
|
LPC Interface to PCH
Dual Serial Ports with asynchronous baud rates up to
1.5Mbps
|
|
Silicon Motion SM2240 Serial ATA to NAND Flash
Controller
|
Compliant with SATA Rev. 2.6 Specification
Up to 50MB/Sec for Read, 40MByte/Sec Write
ECC and wear leveling support
|
| Atmel AT97SC3203 Trusted Platform Module |
Full Trusted Computing Group (TCG) Trusted Platform Module
(TPM) Version 1.2 compatibility
Hardware Asymmetric Crypto Engine
2048-bit RSA® Sign in 500 ms
Internal EEPROM Storage for RSA Keys
|
|
PMC/XMC/DXM Site (may require depopulating QFSP
capabilities)
|
32-Bit 33MHz PCI Bus from PCH to PMC via J11 and J12
x4 PCI Express Bus from PCH to XMC via J15
10GBASE-KR4 connectivity from switch fabric to J16
Dynatem Expansion Module (DXM) I/O on J16 - Contact Dynatem
for additional details
|
|
VPX Rear I/O
|
P0 Utility Connectivity per VITA 46.0 including dual
SMBus
P1 Fabric Connectivity per VITA 65, MOD3-SWH-6F6U-16.4.1-4
P2 Fabric Connectivity per VITA 65, MOD3-SWH-6F6U-16.4.1-4
P2 User Defined I/O: SATA, VGA, PS-2 (Keyboard and Mouse),
USB, and RS232 Serial Port
|
|
Non-Volatile Storage
|
64Mbit EEPROM on PCH SPI bus
16GByte Solid State Flash Drive
|
| Miscellaneous |
On-board temperature monitoring via SMBus
Front panel LED's provide backplane and uplink activity
and link status
Support for Dynatem Expansion Module (DXM) providing additional
storage and debug/diagnostic/programming capabilities
- Contact Dynatem for additional details
|
|
Power Consumption
|
+3.3V @ tbd (typ)
+5V @ tbd (typ)
+12V @ tbd (typ)
Note: Actual power depends on V3PS product configuration.
Power consumption values subject to change without notice
|
|
Form Factor
|
VITA 65 OpenVPX, 3U Switch Module, Profile MOD3-SWH-6F6U-16.4.1-5 |
|
Rugged/Conduction Cooled
|
V3RS is a conduction cooled version of the V3PS
|
VPQ I/O Routing
|
I/O
|
Front Panel
|
VPX P0
|
VPX P1
|
VPX P2
|
|
40 Gb Ethernet
(40 GBASE-KR4)
|
1
|
|
|
|
|
10 Gb Ethernet (1000BASE-KX4)
|
|
|
Data Plane(4)
Fat Pipes
|
Data Plane(2)
Fat Pipes
|
|
1 Gb Ethernet
(1000BASE-KX)
|
|
|
|
Control Plane
(6) Ultra-Thin Pipes
|
|
SATA 2
|
|
|
|
1
|
|
USB 2.0
|
1
|
|
|
1
|
|
VGA
|
|
|
|
1
|
|
SMBus
|
|
2
|
|
|
|
RS232
|
|
|
|
1
|
VPQ Ordering Information
|
V
|
3
|
P
|
S
|
W
|
6
|
T
|
|
|
|
|
|
|
|
|
|
T - Processor Speed
1.03 GHz (ULV) |
| |
|
|
|
|
|
|
FM5000, FM6000,
or FM7000 Switch Options |
|
|
|
|
|
|
|
|
W - 16 Gbyte Flash
Memory |
| |
|
|
|
|
|
|
x - Depopulated
Flash Memory |
|
|
|
|
|
|
|
|
S - Switch |
|
|
|
|
|
|
|
|
P - Convection Cooled
|
|
|
|
|
|
|
|
|
R - Conduction Cooled
|
| |
|
|
|
|
|
|
3 - 3U |
|
|
|
|
|
|
|
|
V - VITA 46 |
back to top
|
|
|
